App Inventor #5 無線搖控 ESP32-CAM APP (Part 2)

 大家好, 歡迎收看本週的Weekend project with Stonez56。 本周要進行的是 App Inventor 第5集 - “無線搖控 ESP32-CAM APP Part 2”! 這個是一個專門為初學者來開發的一個系列, 所以會講的比較詳細, 相信各位只要仔細收看內容並進行實作, 一定會收獲滿滿滿。


因內容較多, 本影片分為上, 下兩集. 本集為 App Inventor程式設計. 

而上集為 UI 界面設計(https://youtu.be/x545mFSZWgg ),
如果你還沒有觀看的朋友, 請記得先去看一下, 再回來看這一集


再前一集是ESP32 程式的說明在這:
Arduino #35 使用 MQTT 無線搖控 ESP32-CAM 模組https://youtu.be/ECHBRdtV-yw 


好, 那我們就開始吧今天的練習吧~

Comments

Post a Comment

Popular posts from this blog

Arduino - DFPlayer Mini MP3 Module

Image
Arduino - Test DFPlayer Mini MP3 Module I found DFPlayer mini MP3 module on China auction site Taobao when I was looking for a MP3 player module for an Arduino projects.  This module is quite small and it only require few pins connections to Arduino and a speaker to work.  Looks really nice for my little project. Actually, the module is quite capable and complicated, if you were interested, please visit this  page . This tutorial here is just to show you how to connect DFPlayer module with Arduino and speaker and the Arduino sketch provided here just to play few sample sounds I collected from Internet. First, I recycled a 2W, 4Omh small speaker from this little music box. Material Needed: DFPlayer Mini module  Speaker - DFPlayer module support to to 3W SD card - 2GB ~ 32GB formatted with FAT or FAT32 MP3 / WAV - audio files Arduino mini Pro Few jump wires As you can see the illustration below I made in Power Point, hardware connection is quite simple (
Read more

Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I)

Image
Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I) Part II of this tutorial is here! Updated Sketch for ESP32 boards   https://stonez56.blogspot.com/2021/07/android-control-color-rgb-led-with.html This time, I am going to show you how to use Android phone to connect to HC-05 Bluetooth module and Arduino. Hardware needed: Arduino mini pro * 1 HC-05 Bluetooth module * 1 RGB LED * 2 Jump wires * 10 HC-05 Bluetooth Module wiring as follow: TX connect to Arduino Pin 11(RX) RX connect to Arduino Pin 12(TX) Remember to connect TX on the HC-05 to RX on the Arduino and RX on the HC-05 to TX on the Arduino, so Arduino can receive data correctly. VCC connect to 5V power GND connect to Ground RGB LED wiring as follow: Warning: You must connect Arduino mini pro, so your PWM Pin can control LED’s color! For example, Arduino mini pro only has 6 PWM pins and they are 3, 5, 6, 9, 10, and 11, other pins do not have PWM. Refer to Wikipedia for PWM R co
Read more

Arduino #27 AsyncWifimanager ElegantOTA ESP32 (WiFi Password Mgnt. + WiFi Firmware Update)

Image
*** If you are using the ESP8266, Please see this:  ESP8266 It would be great if every IoT device deployed with OTA capability with Wifimanager.  Then the IoT device would be able to change SSID & password without connecting the device to the computer to update SSID and password as well as FOTA at any time when you wanted. In this tutorial, let’s combine ESPAsync_Wifimanager and AsyncElegantOTA into a code base to become a handy tool for future IoT projects!  I have made WiFiManager & AsyncElegantOTA tutorial videos. If you don't know what they are and how they work for IoT projects, I strongly recommend you to watch these videos first. This time, I used ESPAsync_WiFiManager library, it's because WiFiManager does not work with AsyncElegnatOTA together. We have to change to ESPAsync_WiFiManager.  The main reason for this is that AsnycWiFiManager is using Asynchronous technology. Which means it can accept connections from different sources at the same time. So, while WiFi
Read more