ESP8266/ESP32 AsyncElegantOTA Wi-Fi OTA

It's always troublesome to update firmware for your IoT projects? Tried Arduino BasicOTA examples, but never get it to work? Then you must try AsyncElegantOTA! It's very easy to use and I've succeed the first time I try it. 



For those of you do not have time to watch it all, here is the video timeline for your quick reference.

Video Timeline:

00:13 Tutorial summary 00:53 What's OTA & Why 01:25 Tutorial begin 01:36 Install AsyncElegantOTA library 02:32 Download ESPAsyncWebServer & ESPAsyncTCP 02:57 Ensure Arduino board is capable of OTA 03:41 Where to place downloaded libraries 04:09 Open sample AsyncElegantOTA sketch 04:52 Upload sketch 05:05 Open serial monitor to see ESP8266 IP address 05:36 Access to ESP8266 from browser 06:10 Update ESP8266 firmware from browser 06:31 Where to find .bin file in VS Code 06:54 How to create .bin file in Arduino IDE 08:16 OTA update ESP8266 firmware 09:01 Next video tutorial - How to combine ESP8266 project with AsyncElegantOTA library


Library URL:

References:

 Direct Download URL:


中文版~

ESP8266/ESP32 AsyncElegantOTA Wi-Fi 更新韌體 (OTA)

IoT 專案更新韌體很麻煩? Arduino BasicOTA 一直無法試成功? 今天來分享一下, 使用 AsyncElegantOTA, 真是太好用了!


沒時間看完全部影片的朋友, 可以由下列時間軸來快速翻閱! 00:13 影片大綱 00:53 什麼是 OTA & 為什麼需要 OTA 01:25 教學開始 01:36 安裝 AsyncElegantOTA 程式庫 02:32 下載 ESPAsyncWebServer & ESPAsyncTCP 程式庫 02:57 確認 Arduino 板子能做 OTA 03:41 下載程式庫安裝位置 04:09 打開 AsyncElegantOTA 示範程式 04:52 上傳程式到 ESP8266 05:05 打開 serial monitor 查詢 ESP8266 IP 地址 05:36 由流覽器連到 ESP8266 06:10 由流覽器更新 ESP8266 韌體 06:31 使用 VS Code - .bin 在什麼目錄 06:54 使用 Arduino IDE - .bin 如何產生 08:16 OTA 更新 ESP8266 韌體 09:01 下集預告 - 如何把 ESP8266 專案加上 AsyncElegantOTA library

ESP8266 Sample Code:


#include <ESP8266WiFi.h>
#include <ESPAsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <AsyncElegantOTA.h>

const char* ssid = "........";
const char* password = "........";

AsyncWebServer server(80);


void setup(void) {
  Serial.begin(115200);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  Serial.println("");

  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  server.on("/", HTTP_GET, [](AsyncWebServerRequest *request) {
    request->send(200, "text/plain", "Hi! I am ESP8266.");
  });

  AsyncElegantOTA.begin(&server);    // Start ElegantOTA
  server.begin();
  Serial.println("HTTP server started");
}

void loop(void) {
}


ESP32 Sample Code:

#include <WiFi.h>
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <AsyncElegantOTA.h>

const char* ssid = "........";
const char* password = "........";

AsyncWebServer server(80);


void setup(void) {
  Serial.begin(115200);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  Serial.println("");

  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  server.on("/", HTTP_GET, [](AsyncWebServerRequest *request) {
    request->send(200, "text/plain", "Hi! I am ESP32.");
  });

  AsyncElegantOTA.begin(&server);    // Start ElegantOTA
  server.begin();
  Serial.println("HTTP server started");
}

void loop(void) {
}


Comments

Post a Comment

Popular posts from this blog

Arduino - DFPlayer Mini MP3 Module

Image
Arduino - Test DFPlayer Mini MP3 Module I found DFPlayer mini MP3 module on China auction site Taobao when I was looking for a MP3 player module for an Arduino projects.  This module is quite small and it only require few pins connections to Arduino and a speaker to work.  Looks really nice for my little project. Actually, the module is quite capable and complicated, if you were interested, please visit this  page . This tutorial here is just to show you how to connect DFPlayer module with Arduino and speaker and the Arduino sketch provided here just to play few sample sounds I collected from Internet. First, I recycled a 2W, 4Omh small speaker from this little music box. Material Needed: DFPlayer Mini module  Speaker - DFPlayer module support to to 3W SD card - 2GB ~ 32GB formatted with FAT or FAT32 MP3 / WAV - audio files Arduino mini Pro Few jump wires As you can see the illustration below I made in Power Point, hardware connection is quite simple (
Read more

Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I)

Image
Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I) Part II of this tutorial is here! Updated Sketch for ESP32 boards   https://stonez56.blogspot.com/2021/07/android-control-color-rgb-led-with.html This time, I am going to show you how to use Android phone to connect to HC-05 Bluetooth module and Arduino. Hardware needed: Arduino mini pro * 1 HC-05 Bluetooth module * 1 RGB LED * 2 Jump wires * 10 HC-05 Bluetooth Module wiring as follow: TX connect to Arduino Pin 11(RX) RX connect to Arduino Pin 12(TX) Remember to connect TX on the HC-05 to RX on the Arduino and RX on the HC-05 to TX on the Arduino, so Arduino can receive data correctly. VCC connect to 5V power GND connect to Ground RGB LED wiring as follow: Warning: You must connect Arduino mini pro, so your PWM Pin can control LED’s color! For example, Arduino mini pro only has 6 PWM pins and they are 3, 5, 6, 9, 10, and 11, other pins do not have PWM. Refer to Wikipedia for PWM R co
Read more

Arduino #27 AsyncWifimanager ElegantOTA ESP32 (WiFi Password Mgnt. + WiFi Firmware Update)

Image
*** If you are using the ESP8266, Please see this:  ESP8266 It would be great if every IoT device deployed with OTA capability with Wifimanager.  Then the IoT device would be able to change SSID & password without connecting the device to the computer to update SSID and password as well as FOTA at any time when you wanted. In this tutorial, let’s combine ESPAsync_Wifimanager and AsyncElegantOTA into a code base to become a handy tool for future IoT projects!  I have made WiFiManager & AsyncElegantOTA tutorial videos. If you don't know what they are and how they work for IoT projects, I strongly recommend you to watch these videos first. This time, I used ESPAsync_WiFiManager library, it's because WiFiManager does not work with AsyncElegnatOTA together. We have to change to ESPAsync_WiFiManager.  The main reason for this is that AsnycWiFiManager is using Asynchronous technology. Which means it can accept connections from different sources at the same time. So, while WiFi
Read more