3D Print - iPAD Holder for Treadmill

Tired of using tape to glue the iPad to the treadmill, my wife asked me to design and print an iPad holder for her. Here it is! 


This is a multiple weekends project, since the 3D design took me many weeks to complete. Hope you could also get some inspiration from this and design your own.


STL file on Thingverse:  https://www.thingiverse.com/thing:4459427

Comments

Post a Comment

Popular posts from this blog

Arduino - DFPlayer Mini MP3 Module

Image
Arduino - Test DFPlayer Mini MP3 Module I found DFPlayer mini MP3 module on China auction site Taobao when I was looking for a MP3 player module for an Arduino projects.  This module is quite small and it only require few pins connections to Arduino and a speaker to work.  Looks really nice for my little project. Actually, the module is quite capable and complicated, if you were interested, please visit this  page . This tutorial here is just to show you how to connect DFPlayer module with Arduino and speaker and the Arduino sketch provided here just to play few sample sounds I collected from Internet. First, I recycled a 2W, 4Omh small speaker from this little music box. Material Needed: DFPlayer Mini module  Speaker - DFPlayer module support to to 3W SD card - 2GB ~ 32GB formatted with FAT or FAT32 MP3 / WAV - audio files Arduino mini Pro Few jump wires As you can see the illustration below I made in Power Point, hardware connection is quite simple (
Read more

Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I)

Image
Android control color RGB LED using HC-05 Bluetooth with Arduino (Part I) Part II of this tutorial is here! Updated Sketch for ESP32 boards   https://stonez56.blogspot.com/2021/07/android-control-color-rgb-led-with.html This time, I am going to show you how to use Android phone to connect to HC-05 Bluetooth module and Arduino. Hardware needed: Arduino mini pro * 1 HC-05 Bluetooth module * 1 RGB LED * 2 Jump wires * 10 HC-05 Bluetooth Module wiring as follow: TX connect to Arduino Pin 11(RX) RX connect to Arduino Pin 12(TX) Remember to connect TX on the HC-05 to RX on the Arduino and RX on the HC-05 to TX on the Arduino, so Arduino can receive data correctly. VCC connect to 5V power GND connect to Ground RGB LED wiring as follow: Warning: You must connect Arduino mini pro, so your PWM Pin can control LED’s color! For example, Arduino mini pro only has 6 PWM pins and they are 3, 5, 6, 9, 10, and 11, other pins do not have PWM. Refer to Wikipedia for PWM R co
Read more

Arduino #27 AsyncWifimanager ElegantOTA ESP32 (WiFi Password Mgnt. + WiFi Firmware Update)

Image
*** If you are using the ESP8266, Please see this:  ESP8266 It would be great if every IoT device deployed with OTA capability with Wifimanager.  Then the IoT device would be able to change SSID & password without connecting the device to the computer to update SSID and password as well as FOTA at any time when you wanted. In this tutorial, let’s combine ESPAsync_Wifimanager and AsyncElegantOTA into a code base to become a handy tool for future IoT projects!  I have made WiFiManager & AsyncElegantOTA tutorial videos. If you don't know what they are and how they work for IoT projects, I strongly recommend you to watch these videos first. This time, I used ESPAsync_WiFiManager library, it's because WiFiManager does not work with AsyncElegnatOTA together. We have to change to ESPAsync_WiFiManager.  The main reason for this is that AsnycWiFiManager is using Asynchronous technology. Which means it can accept connections from different sources at the same time. So, while WiFi
Read more